Professional Range

32" Information Display Panel

PN-325 Professional LCD Monitor with WXGA resolution

Model:
PN325


The Sharp PN-325 Professional LCD Monitor with 32" Class (31-1/2" diagonal) screen size and 16 : 9 WXGA (1366 x 768) HD resolution offers superb performance, image quality and reliability for use in a wide array of commercial signage and display applications.

  • 32" Class (31-1/2" diagonal) "ASV" Advanced Super View Normally Black TFT LCD.
  • Compatible for extended use (i.e. 24/7 operation) in both Landscape and Portrait modes.
  • High Definition 1366 x 768 (WXGA) Resolution with 1500 : 1  Contrast Ratio and 6ms Response Time.
  • Rugged Design - incorporating commercial components, heavy-duty carrying handles and clean professional appearance.
  • Full Complement of Inputs - including DVI-D, Analog RGB, Component Video, S-Video, Composite Video, Stereo Audio and RS-232.
  • Built-in 7W/channel Audio Amplifier - for use with external 3rd party speaker system.
  • Diagnostic RS-232 Central Control allows the PN-325 series LCD monitor to be controlled, monitored and have diagnostics performed from a central location.
  • Dual Fine_Engine ("DFE") provides superior display of both digital and analogue sources.
  • Built-in Enlargement Function to create up to 4 x 4 video walls from a PC, as well as "Picture-in-Picture" and "Picture-by-Picture" capabilities. also offers lockable key panel, power-on delay function and extensive colour adjustments.
  • Ultra_High Aperture LCd achieves high brightness of 420 cd/m2 and wide viewing angles (176° x 176°)
Model Name PN-325
  32 inch Wide ( 80 cm diagonal )
  Maximum Resolution 1,366 x 768 Dot
  Maximum Colour 16.77 million colours (8 bit)
  Pixel Pitch Horizontal 0.511 mm x Vertical 0.511mm
LCD Panel Maximum Brightness 420 cd/m2
  Contrast ratio 1500 : 1
  Viewing angle Horizontal 176ē / Vertical 176ē (CR = 10)
  Display Screen Size 697.7 x 392.2 mm  (width x heigth)
PC Input Signals Video Analog RGB (0.7Vp-p) [75 O] , Digital (DVI Standard 1.0 Compliant)
Sync signals Horizontal / Vertical separate, Sync-On-Green, Composite Sync
Plug & Play VESA DDC2B
Power Management VESA DPMS Compliant, DVI DMPM Compliant
Video Signal NTSC (3.58 Mhz), NTSC (4.43Mhz), PAL, PAL-60, SECAM
  PC Signal Analog Mini D-sub 15 pins x 1, Analog BNC x 1*1 .
DVI-D 24 pins x 1
  PC Audio ? 3.5 mm Mini Stereo Plug x 1
Input Serial RS-232C D-sub 9 Pin x 1
Terminal Video BNC x1, RCA x 1*2
  Component Video BNC x 1
  S-Video 1 port *2
  Audio Input RCA socket (L/R x 1)
  PC Signal Mini D-sub 15 pin x 1
Output Video BNCx 1
Terminal Sound RCA socket (L/R x 1)
  Speaker Speaker output 7W + 7W (6O)
  Enlarge Adjustment Digital scaling (VGA/SVGA/XGA adjusted and enlarged
 to 1366 x 768)
  User Adjustment Clock, Phase, Screen Position, Black Level, Contrast, Brightness
  Colour Temperature, Gamma Adjustment, Volume
  Mute, OSD Position
  Display Mode, Monitor Setting
  Information Model Name, Monitor Setting
  OFF Timer 1 - 23 Hour Setting
  Adjustment Lock Operation Lock, adjusted values non-changeable
  Enlargement Max 4 x 4 Screen (M x N Screen Available - PC Signal Only)
  PinP, PnP Yes
  Power-On-Delay Settings between 1 - 60 Seconds
  Temperature Monitoring Alert prevents temperature increase by adjusting fan speed and backlight brightness
Operation Button Power, Input
Installation 6-point mounting (200 x 200 mm), 4 point mounting (200 x200 mm) (M6 screw)
Orientation Portrait and Landscape mounting (Horizontal and Vertical) orientation supported
Fan Yes (Operates only when temperature exceeds preset value)
Power Consumption 130 W
Operating Temperature 0ēC - 40ēC
Operating Humidity 20 - 80% (No Condensation)
Dimensions (Display Part Only) Approx : 789 x 477 x 133 mm ( W x H x D) (excluding protruding parts)
Weight Approx . 14 Kg
Packaging Dimensions & Weight Approx: 925 x 604 x 280 mm (W xH x D) / Approx. 19Kg
Accessories AC Power Cable, Remote Control and Battery (AAA x 2) ,
 CD-ROM, Operation Manual
*1 Plug and Play not supported *2 These inputs can not be used simultaneously

 
Business Products Warranty Statement

 

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

 

WARRANTY PERIODS

Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand