Professional Range

52" Information Display Panel

52" Professional LCD Monitor - Full HD 1920 x 1080

Model:
PNS525

The Sharp PNS525 Professional LCD Monitor redefines the professional large-format monitor market. With full 1920 x 1080 HD resolution and 132 cm (52") screen size, the PNS525 is the monitor of choice for the most sophisticated digital signage and display applications.

Full High Definition Resolution

  • 1,920 x 1,080 native resolution
  • ASV Black TFT
  • 1800 : 1 contrast ratio and 6ms response time

Designed for commercial use

  • 24/7 operation by using selected components
  • Supports operation in landscape and portrait orientation
  • Metal back cabinet, heavy duty carrying handles
  • Fan-less architecture and built-in temperature sensor
  • DVI-D loop through for daisy chain connection of multiple displays

Maintenance and Control

  • Diagnostic RS-232 central control
  • IP addressable via LAN interface

Full Complement of commercial features

  • Picture in Picture and Picture by Picture capabilities
  • Schedule function to switch monitor on and off
  • Flexible image formats
  • Power on delay
  • Lockable key panel
  • Colour adjustment
Model PN-S525    
LCD module 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD
Max. Resolution  (pixels)  1920 x 1080    
Max. Colours 16.77 M colours (8 bits/colour)
Pixel pitch 0.600 mm x 0.600 mm (H x V)
Viewing angle 176º right/left/up/down (contrast ratio = 10)
Screen active area (mm) 1152.0 x 648.0 mm
Computer Input Signal Digital (DVI 1.0 standard -compliant), Analog RGB (0.7 Vp-p) [75?]
  Sync Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
    Composite sync (TTL: positive/negative)
Video Colour System PAL, PAL-60, SECAM, NTSC (3.58 Mhz), NTSC (4.43 MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals   PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1
        HDMI x 1
    PC Analog Mini  D-sub 15 pin
        BNC*1*2 x 1
    AV Composite Video BNC x 1
      S-Video  x1
      Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1
      Audio RCA pin (L/R) x 1
Output terminals   PC/AV Digital DVI-D 24 pin x 1
    Audio   RCA pin (L/R) x 1
    Serial (RS232) D-sub 9 pin x 1
    Speaker   & W + 7 W [6?]
LAN terminal   10 BASE-T/100 BASE-TX  
Power requirement AC  100V - 240V, 50/60 Hz  
Operating temperature 0ºC to 40º C
Operating humidity 20% to 80% (no condensation)  
Power consumption 275 W (Input signal waiting mode: 12 W, Standby mode: 2.0 W
Dimensions Approx. 1,254 x 149 x 742) (excluding protrusions)
Weight Approx. 39 Kg

 
Business Products Warranty Statement

 

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

 

WARRANTY PERIODS

Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand