Data Projectors

2500 ANSI Lumens DLP Projector

High Brightness True SVGA Multimedia Projector

Model:
XR32S

 
Outstanding Brightness and Contrast Ratio with High-definition Capability
Maximise Your Enjoyment and Presentation Effectiveness
  • 2500 ANSI lumens high brightness
  • True SVGA (800 x 600) native resolution with up to UXGA in intelligent compression
  • Better colour reproduction and reliability of long-lasting picture quality
  • Direct power off and auto restart
  • Front exhaust system to avoid disturbing viewers with fan noise and air
  • Presentation assist functions by remote control (page up/down, GUI pointer, spotlight and mouse control)
  • Superb dust resistance achieved with DLP sealed system (dust proof optics) and new lamp design without filter
  • Keystone correction function for correcting trapezoidal distortion up to an angle of 20 degrees
  • Low fan noise: 29 dB (eco+quite mode), 32 dB (bright mode)
  • Long lamp life up to 4000 hours (eco+quite mode)
  • 4:3 native aspect ratio and 16:9 image shift function

For more details see product brochure

 

Display device

0.55" DLP chip x 1

Resolution

SVGA (800 x 600)

Brightness

2,500 ANSI lumens

Contrast ratio

2,000:1

Lens

F number

F 2.5 – 2.6

Zoom

Manual, x1.15 (f = 20.4  – 23.5 mm)

Focus

Manual

Picture size

40" (102 cm) to 300" (762 cm)

Projection distance

40": 1.5 – 1.7 m, 100": 3.7 – 4.3 m, 300": 11.2 m

Input signals

Computer RGB

UXGA*1*2,SXGA+*1*2, SXGA*1, WXGA*1, XGA*1, SVGA, VGA

Mac 21" *1*2, 19" *1*2, 16" *1*2, 13" *2

DTV

 

1080p / 1080i / 1035i / 720p / 576p / 576i / 540p / 480p / 480i

NTSC / PAL / SECAM

Input terminals

Computer / Component (mini D-sub 15 pin)

x 1

S-Video (mini DIN 4 pin)

x 1

Video (RCA)

x 1

Audio (RCA)

x 1 (L/R)

Output terminals

Computer / Component (mini D-sub 15 pin)

x 1

Control and communication terminals

USB (type B)

x 1

RS-232 (mini DIN 9pin)

x 1

Horizontal frequency

15 – 110 kHz

Vertical frequency

45 – 85 Hz

Speaker

2 W (mono)

Fan noise

32 dB (Bright mode), 29 dB (Eco+Quiet mode)

Projection lamp

200 W

Lamp life

4,000 hrs (Eco+Quiet)

Replacement lamp

AN-F212LP 

On-screen display languages

English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, simplified Chinese, Korean, Japanese, Russian, Polish, Arabic, Turkish

Rated voltage

AC 100-240 V

Rated frequency

50/60 Hz

Input current

2.9 A

Power consumption (standby)

267W (5.0W) with AC 100V, 259W (5.7W) with AC 240V

Heat dissipation

1,010 BTU/hour with AC 100V (Bright), 830 BTU/hour with AC 100V (Eco+Quiet)

980 BTU/hour with AC 240V, 810 BTU/hour with AC 240V (Eco+Quiet)

Operation temperature

+5o C to +35o C

Cabinet

Plastic

Dimensions (main body) [W x H x D]

270 x 89 x 265 mm

Weight (approx.)

2.9 kg

Supplied accessories

Remote control, Two R-6 batteries, Lens cap, Power cord (1.8m), RGB cable (3.0m), CD-ROM, Operation Manual

Design and specifications are subject to change without prior notice
*1 Compatibile in intelligent compression, *2 Analog RGB signal only
DLP logo is registered trademark of Texas Instruments

 
Business Products Warranty Statement

 

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

 

WARRANTY PERIODS

Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand