Information Display Panels


  • PN-70SC3 Touchscreen LCD Monitor
  • 70" in size
  • 6 Point Touch
  • IR technology
  • SHARP Pen Software


Technical specifications

Expand All
Screen 70-inch widescreen (176.6 cm diagonal) UV2A LCD
Max.Ressolution 1,920 x 1,080 pixels
Max. Display Colours 16.7 million colours
Pixel Pitch (H x V) 0.802 x 0.802 mm
Max. Brightness (average) 300 cd/m2
Contrast Ratio 3,000 : 1
Viewing Angle (H/V) 160º / 160º (CR > 10)
Active Screen Area 1,538.9 x 865.6 mm
Response Time 6 ms (gray to gray, avg.)
Backlight LED, edge lit
Installation Landscape
Touch Technology IR, Infrared blocking detection method
Multi Touch 6 points
PC Connection Port USB 2.0
Power Supply Supplied from USB port
Driver OS: Windows® 7, 8.0, 8.1,10.
Protection Glass Thickness Thickness: Approx 3.4 mm, Shock resistance: 130 cm
Communication Not supported
Button -
Video Analogue RGB (0.7 Vp-p) [75 Ω]
Synchronisation Horizontal/vertical separation (TTL: positive/negative)
Plug & Play VESA DDC2B
Power Management -
Standard NTSC (3.58 Mhz, 4.43 Mhz), PAL , PAL60, SECAM
Options -
Display Port™ -
Component Video 1
PC Analogue mini D-sub 15 pin 1
RS-232C In
Video BNC -
Component BNC -
RCA pin (L/R) 2
Audio (3.5mm stereo mini jack) 1
With Options -
DisplayPort™ -
RCA pin(L/R) 1
3.5mm mini stereo jack -
Digital Audio Output (Optical) -
Micro-USB -
Options -
Standard -
Options -
Built-in 10 W + 10 W
External -
Mounting VESA (4 points), 400 x 400 mm pitch, M6 screw
Power Supply 100V - 240V AC, 50/60 Hz
Power Consumption 235 W
Dimensions (W x D x H) (approx, display only) 1,633 x 109 x 994.5 mm
Weight 56 Kg
Operating Temperature 5ºC to 35ºC
Operating Humidity 20% to 80% RH (No condensation)
Main accessories AC power cord, remote control unit, batteries, SHARP Pen Software CD-ROM, set-up manual, cable clamps x 2, USB cable, eraser, pen tray, touch pen, blank sticker
Options PFW5505


DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the US and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.



Business Products Warranty Statement

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.


Data Projector24 months (excluding lamps and air filters)
Copier / Printer  6 months
Electronic Cash Registers12 months
Facsimile12 months
Information Display Panel36 months
POS Terminals12 months
AL Copier12 months
Calculator12 months
Personal Organiser12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand